XCMG NXG5251XYK3 wing van truck manufactured by Nanjing XCMG Automobile Manufacturing Co., Ltd.
NXG5251XYK3
XCMG Chinese wing van truck NXG5251XYK3 manufactured by Nanjing XCMG Automobile Manufacturing Co., Ltd. (an automobile manufacturer in Nanjing, Jiangsu Province, China; manufactures a range of special purpose vehicles, including XCMG wing van trucks); the wing van truck based on NXG1251D3PL1X chassis. Engine: CA6DF3-22E3 / CA6DE3-22E3 / CA6DF3-24E3F / YC6A240-33, without ABS, tires are 10.00-20, 11.00-20, gross vehicle weight is 24975 kg, diesel fuel, cab seating capacity is 3, cargo body is 9500 × 2550 × 2430 mm, curb weight is of the China truck 10780 kg, environmental standard is National III / Euro 3, rated capacity is 14000 kg, wheelbase is 1900+5570 mm, max. speed is 95 km/h.
Dimensions and Weights of the China truck XCMG NXG5251XYK3
Dimensions and Weight Specifications of the China truck
Overall Dimensions of the China truck
Overall length (mm)
11985
Overall width (mm)
2540
Overall height (mm)
3950
Cargo Body Dimensions
Cargo body length (mm)
9500
Cargo body width (mm)
2550
Cargo body height (mm)
2430
Weights, Ground Pressure and Capacity
Rated capacity (kg)
14000
Curb weight of the China truck (kg)
10780
Gross vehicle weight (kg)
24975
Load factor (payload to weight ratio)
1.31
Axle load distribution (kg)
6750/6750/11475
Wheel Base and Track
Wheelbase (mm)
1900+5570
Front track (mm)
1940/1940, 1980/1980
Rear track (mm)
1860, 1848
Front and Rear Overhang
Front overhang (mm)
1260
Rear overhang (mm)
3255
Angle of Approach and Departure
Angle of approach (deg.)
26
Angle of departure (deg.)
10
Wheels and Tires
Tires and Wheels of the China truck XCMG NXG5251XYK3
Number of axles
3
Number of tires
8
Tires dimension
10.00-20, 11.00-20
Misc. Specifications
Miscellaneous Specifications XCMG NXG5251XYK3 (wing van truck)
Max. speed
95
ABS
none
Cab seating capacity
3
Steering
steering wheel
Leaf springs
9 / 9 / 12+10
Additional Information
The Frontal top compartment closed, not open. The optional flat cab models, optional J Series cab. The car accelerates to exercise outside noise meets GB1495-2002 standard second phase limits. Protective Material: Q235, Connection: bolt connection, protection section Dimensions Width: 124mm, Depth 78mm, 530mm ground clearance should be installed tachograph. (Note: possible inaccuracies)
